I recently noticed that out domain time was drifting about 5 seconds a week, not a big deal for a while but if it gets too out of sync we would start having Kerberos issues, so better fix it now before we start seeing problems. Here’s what i did to get our domain back on the proper time (and keep it that way)

First off go to your DCHP serve, open DHCP, select ipv4, right click “Server Options”,Check 004 Time Servers and type the IP address for the server you want to be the time server (strongly recommend you use your Primary Domain Controller)

Now open up your PDC, and run “CMD” as an administrator and type the following commans:

w32tm /config /manualpeerlist:”0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org”,0×4 /syncfromflags:MANUAL

net stop w32time
net start w32time

w32tm /resync /rediscover

That will set round robin time checks with 0.pool.ntp.org,1.pool.ntp.org,and 2.pool.ntp.org. the second set will restart the time service, and the third forces a sync. you should be all set and as your computers renew their dhcp leases they will start getting their time from your time server! if you need to force a computer to update its time you can use the “w32tm /resync /rediscover” command.

If you want to use a different time server just replace the *.pool.ntp.org with one of these servers

Enjoy!!

If your anything like me you’ve cough world cup fever!!! Ive been using my android phone to keep up to date on the games i cant be at the pub to see, track my teams, and overall enrich my world cup experience! i thought I’d share some of the apps I’ve been using:

The best app I’ve found so far for tracking stats, players, finding times, etc etc is “World Droidcup”! its got a pretty interface, ALOT of information, but can sometimes be slow on the updating. I had to run the app a couple times before it started working properly, but its definitely number one on my list for its ease of use and abundance of information (after some initial hiccups)

My second favorite app for getting all the information you can handle on the game is Goal.com Mobile! its sleek, shiny, and gives you alot of information! Its coverage for the world cup isn’t perfect, but if you are a soccer fan then i definitely recommend this for all your games post world cup! you can set favorites in every league, track players, get updates on stats and standings. its absolutely wonderful for soccer in general!

And I’ve saved the best for last! One of the great things about hosting this world cup in South Africa is the energy you get from the fans in the stand! So much national pride, love of the game, and they have brought their own touch to the game…. that’s right, I’m talking about the Vuvuzelas! The wonderful horns that will forever remind me of soccer! And this is the best app to get your Vuvuzela on in your local pub or watch party! “World Cup Virtual Vuvuzela” Ive tested all the ones on the market now, and this one is absolutely the best!

That’s all Ive got for now! not really much else that would improve the world cup for an android user other than mobile video, looks like we will need to wait till next world cup for that one! Hope you enjoy my suggestions!!

If your exchange 2010 server is stuck on Applying Computer Settings during boot up it could be any number of things! First off make sure that noone recently disabled IPv6, that can screw up alot of things. if that has recently happened boot into safemode with networking, and re-enable IPv6. Another cause could be if someone has brought up another exchange server on your domain. You really hafto get the configuration perfect on the new exchange server before rebooting the original. otherwise the original willnot boot properly. if this may be the cause just shut down the new server and reboot the original. once it safely boots up you can bring the new one back up aswell.

Another possible issue is that your server was never placed in the proper groups. Check to make sure your exchange server is a member of the following:

Domain Computers, Exchange Domain Servers, Exchange Enterprise Servers, Exchange Servers

It may be different if your on a forest, but this is what solved the problem for me! If you have anything to add or need any help please comment!

So back in 2004 I shaved a quake symbol into my head for Quakecon, it was wicked awesome and I got alot more free stuff as a result. but I was 18 at the time.. I’m 24 now.  What I’m saying is I want to do it again, so as usual with these decisions I’m turning it over to the Internet. what do y’all think?

Here are some pics of the ’04 hair:

Ive run across this issue several times, and with several installs. the story always goes like this, Cannot install X software because the system is waiting to reboot. and obviously a reboot doesn’t clear it or i wouldn’t be posting about it. The software that prompted me to post this was SQL server 2008.
Heres how to fix the error. we need to open up Regedit by clicking start (then run) and typing “regedit” and hitting enter. Now navigate to the following key

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
\PendingFileRenameOperations

There will probably be several files listed in there, just edit the key and delete them all. Then restart the installation of whatever software it was, and it should get past that step!

Ive been playing with converting some of our physical servers into virtual machines lately using the System Center Virtual Machine Manager. its actually surprisingly easy! but occasionally on some of our web servers i would get the following errors:

Error (3154)
An internal error has occurred trying to contact an agent on the server.
(Internal error code: 0x8099319E)
Recommended Action
Ensure the agent is installed and running. Ensure the WMI service is installed and running, then restart the agent.

and

Error (2910)
VMM does not have appropriate permissions to access the resource on the server.
(Access is denied (0×80070005)
Recommended Action
Ensure that Virtual Machine Manager has the appropriate rights to perform this action.

It turned out this was due (for the most part) to port 443 being used by apache and other programs, If anything is listening on 443 it will throw a wrench into the P-V process. so you can try killing apache and all, and sometimes that works. i killed everything listening on port 443 then ran a “NETSTAT -ANB” to see if anything else was listening, came up that nothing was. so i ran it again and it failed. If your experiencing anything similar here is the solution:

1. Open Regedit.exe. on the physical machine (Not the SCVMM server)
2. Navigate to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft System Center Virtual Machine Manager Server\Setup
3. Change the DWORD value “P2VBITSTcpPort” to a port number less than 32768. (i used 32485, but aslong as its a unused port you’ll be fine)
4. Restart the Virtual Machine Manager P2V Agent service.
5. Retry the job on the SCVMM server

That will change the default port that the Virtual Machine Manager P2V agent uses. If you have any questions let me know! Hope this helps!

Ive been running windows 7 for a while now, and decided to pull some data off of old hard drives. I plugged in one of my ata drives though a usb device and the disk management said it was an invalid disk. i tried taking it off line and bringing it back online and that just crashed disk management. I did have the option to convert it to a basic disk but that would wipe all data! So here’s what i did to fix it and keep my precious data!
First i downloaded HxD its a free Hex editor. once its installed open the problem disk by clicking “Extras” then “Open Disk” Make sure you open the right disk! your disk management will list your disks starting with 0, this tool will start with 1. this is very important as you could seriously fuck shit up if you don’t do this proper . Also, the default option is to open the disk read only, your going to want to uncheck that when your ready to fix your “Invalid disk”.
So we’ve got the broken disk open, scroll down to offset 1C0(the row) and look in the 02 column. that cell should read “42″ which means Dynamic disk, Change it to “07″ and save changes. if your using this drive externally unplug it and plug it back in. otherwise reboot your computer.
That should have re initialized the disk and it will now be readable. if not go into disk management and take the disk offline then bring it back online. and the best part No Data Loss!!! Hope this helps!

So I’ve been following the tron legacy viral marketing stuff and i love it! Ive always loved the idea of viral marketing, I’ve done similar posts but this one is going to be my favorite!
So the first thing that happened was the Comic Con reveal. they had a bunch of people meet at a recreation of Flynns arcade, i didn’t get a chance to go but it looked awesome!

Now here’s the part you can follow along with! Flynnlives.com launches, its an underground group of people convinced the protagonist from the original movie is alive somewhere. He apparently vanished after the events of the original Tron movie. a few months later they send out Bits to various scifi bloggers with the link to Zero Hour. This was a binary countdown to the page you can see now, at the end of the countdown was a list of greyed out cities lighting up a few at a time, when your city is up you could click it and get the location to a meet, here you would be given a wallet, containing various items (see video below) and a cell phone which the coordinators of this marketing event use to contact the “envoys”.

Next a few other related sires cropped up. like the Encom website and this strange website. When you visit the second website you see 0 2 3 and RPG. each of these sections is something of a quiz. 0 is the Fibonacci sequence, 2 is prime numbers, 3 is Conway’s sequence, and RPG is the levels in the original Tron arcade game. This was truly badass doing it while everyone else was trying to find out what the hell you were supposed to do. anyway at the end of it you are given a link to the trailer for tron legacy! if you haven’t seen it, check it out!

Next up was the launch of Arcade Aid. a collage of 56 game references. if you name then all then you have proven your worth and will be able to create a Encom badge! which you are supposed to use to infiltrate the company. here’s mine:

Scanning the QR code on the badge will lead you to an Encom internal site using your employee ID and password you can login and access your encom email. all the emails are pretty standard corporate stuff sofar. but there is an announcement about a press conference in less than 3 weeks.

Alittle unrelated, but heres an interview with the Encom CEO Allen Bradley:

Update: Looks like the next phase of this campaign will be at WonderCon! Here is a press release from Encom:

FOR IMMEDIATE RELEASE:
ALAN BRADLEY TO HEADLINE MAJOR ENCOM PRODUCT ANNOUNCEMENT

March 24th, 2010

Newly-minted Executive Consultant Alan Bradley will introduce the latest addition to the Encom International product library on April 2 in San Francisco.

Software giant Encom ushered in the digital age with an unrivaled library of gaming titles. Now, Encom International circles the globe with advanced software systems that include communications, sports, entertainment, navigation, agricultural, health care, construction, weather, military and governmental applications on every continent.

Bradley began his career with Encom as a security systems engineer and rose through the ranks to be named CEO in the early 1990s. When he exited the executive suite, he took on a far greater role. His visionary research turned Encom into the industry leader in sustainable production and distribution methods — methods which are now the best practices for technology companies around the world. “Whether the challenge is to establish communications in a national disaster, or keep kids engaged as they battle Recognizers, I love what I do. Encom will always be my home. ”

CEO Kurt Hardington sums it up this way: “Alan’s new title and role reflect his unique position as part of the Encom story. He keeps us grounded, yet he’s the first to move forward when technology takes us in a new direction. That’s why he’s perfect to present our newest product – it’s where we’ve come from and where we’re going.”

Alan Bradley will take the stage at 8pm in Justin Herman Plaza on April 2 to unveil the next generation in Encom innovation.

Press Inquires:
Celia Melardin
Encom International
pr@EncomInternational.com

Update: the “Encom press conference” looked like fun! things didn’t go off without a hitch though! heres the first part of the conference, with an announcement from Alan Bradly.

The following video was supposed to happen During Alan Bradly’s talk, but due to high winds the helicopter wasn’t able to take off until too late. so they improvised by grabbing a bunch of FlynnLives folk and getting them to storm the stage.

So badass!

So that’s all we have sofar. but as more comes ill update this post!

A while back i had users complaining that they no longer had their drop down address list when they were sending email in outlook. You know that list that drops down when you start typing the name of your intended recipient? If your not using folder redirection this is how to move that list form one computer to another:
First off go to the computer that already has the auto complete list on it. close outlook and go to:

For Windows XP: “C:\Documents and Settings\\Application Data\Microsoft\Outlook\”
For Windows 7: “%appdata%\Microsoft\Outlook\”

show hidden files and locate the .NK2 file (it’ll prob be called Outlook.NK2). that’s the file containing the auto complete address list. Just copy this file to the same directory on the new computer (If your switching to 7 follow the windows 7 path above) and the list will be transferred! Enjoy!

So when swapping out a users computer, if you don’t have folder redirection setup you’ll need to manually move their bookmarks and all over to their new compy. this is easy with IE, but with Firefox its a little different. Everything you’ve configed in Firefox is located in one directory that you can just copy paste to the new computer. That magical directory is:

%APPDATA%\Mozilla\Firefox\Profiles\

If you want to move Everything just copy the contents of the profile folder in that directory to the same directory on the new computer. if you want to pick and choose these are the files of interest:
places.sqlite – Bookmarks and history
key3.db – Key database for your saved passwords (if you move your passwords, you gotta move this file too)
signons.sqlite – Saved passwords
cookies.sqlite – All your cookies

All these files can be moved while firefox is running using \\computername\c$ style admin shares! Enjoy!